Critical Factors Influencing Oscillating Knife Cutting Precision

To ensure the accuracy of your oscillating knife cuts, it is important to understand three main factors:

1. Blade sharpness

If a blunt blade is used during cutting, the material will not be cut through or even damaged, thus affecting the material accuracy. Good blade material and sharpness are in line with the standard. Moreover, the cutting machine can replace the blade at any time. So when choosing a blade, don’t be greedy for a small bargain, which will affect the material accuracy and cutting efficiency.

2. Material material

The cutting accuracy is mainly affected by the thickness and hardness of the material. The thicker the material, the lower the accuracy and the larger the slit. The harder the material, the more difficult it is to cut, which also affects the accuracy. Under the same conditions, the effect of cutting cloth and cutting acrylic is different. Therefore, when cutting different cloths, it is necessary to choose a suitable blade to maximize the cutting accuracy.

3. Work surface

If the work surface is high in accuracy, then the blade is cut on a high-precision work surface, and the material accuracy is of course very high. If the work surface is not on the same horizontal line, it will fluctuate up and down. Even a small gap will affect the accuracy. Therefore, when inspecting the machine, you must pay attention to the quality of the workbench, and you can judge the machine through simple test runs and trials.

Later, We will continue to update informations, and you can find more information on our website (www.ruida-blades.com) blog.